Feautures of the Mantis DPV – K22 compass:
- It includes a depth and temperature gauge, a dive timer and a GPS receiver.
- Connecting to the compass is via wireless.
- Software to connect to the compass can be downloaded from our website.
- Waypoints: It is possible to select pre-entered GPS points underwater for a new route.
- The tip tilt has a compensation range of + and -90 degrees.
- Mounting on the scooter can be done in various places by using the adapter block with the universal mounting plate. These are available separately.
- With the manual heading, the direction can easily be fixed in the compass rose.
- With the GPS heading you can navigate to a pre-set GPS point.
- On the main screen there are 4 memory locations for the current and previous courses.
Technical specifications
Work temperature |
2 to 50 ºC |
Storage temperature |
-5 to 40 ºC |
Compass Accuracy |
+/- 3 degree; resolution 1 degree |
Maximum depth |
100 meter// reading : 99.9mtr // resolution: 10 cm |
Battery |
Rechargable LiPo; operating time ca. 6 uur on a fully charged battery at 15 ºC |
Temperature range |
-20 to 50 ºC |
GPS receiver |
GPS/GNSS Quectel |
Communication |
2.4GHz ISM band; output power<4mW, class2 |
Conformity |
The compass complies with the 2014/53 / EU Guidelines |
Functions:
The compass indicates the course and the chosen heading. It is tip tilt compensated; has a depth gauge, temperature gauge, timer and battery indicator.
The screen is very clear underwater and is easy to read due to the large letters.
GPS receiver: display and save the current position above water. Manual input of a coordinate is possible. This is useful on a boat, for example, if you want to add a new coordinate, but don't
have a PC at hand. After choosing two GPS coordinates, the heading and distance are calculated and shown in the display.
20 GPS coordinates can be entered in the compass via the PC. Under water (without GPS reception) the starting point and end point can be chosen for a route. Of course, the starting point must
correspond to the current position. When the end point is reached, it can serve as the starting point for a new route. 50 GPS coordinates can be stored on the PC.
The compass has a GPS locator function to capture the GPS coordinates of an object without having to take off. The compass is released to a float or deco balloon to establish a GPS coordinate.
For example from a wreck or other object. After about 2 minutes, the compass has collected enough satellites to determine the correct position. After downloading the compass, this position is
then saved. This point can also be used directly as the starting point of a new route.
599,00 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Deutschland Mehr anzeigen Weniger anzeigen
49,00 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Deutschland Mehr anzeigen Weniger anzeigen
59,95 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Deutschland Mehr anzeigen Weniger anzeigen
49,95 €
inkl. MwSt, versandkostenfrei in bestimmte Länder
Versandkostenfrei in folgende Länder: Deutschland Mehr anzeigen Weniger anzeigen